Denstoj Rocker Retainers with Hydraulic Lifters for SR20DE / SR20DET Nissan Engine
Denstoj Rocker Retainers with Hydraulic Lifters for SR20DE / SR20DET Nissan Engine
5.0 / 5.0
(1) 1 total reviews
In stock
Couldn't load pickup availability
A known weak point of the SR20 valvetrain is rocker arms dislodging under high RPM, limiter cuts, or over-rev conditions. Denstoj Rocker Retainers are here to fix that.
We've now adapted our proven retainer clip system to suit the legendary Nissan SR20DE and SR20DET platforms.
These clips lock onto OEM rocker arms, paired with custom-machined HLAs (Hydraulic Lash Adjusters) that accept the clip. The result? Rockers stay put – giving you confidence on limiter, at the track, or during a misfire event.
What You Get:
- 8x OEM-style hydraulic lash adjusters (lifters) with our proven retainer groove
- 8x Drop-in rocker retainer clips that fit over the existing rocker arm
(Rocker arms not included)
Fitment:
We recommend running guide shims on both sides of the rocker arm to reduce lateral movement.
Important: Hydraulic lash adjusters (HLAs) must be checked for plunger movement before installation. If the plunger does not compress when squeezed firmly between your fingers, the lifter is likely pumped up with oil.
To release the oil:
1. Place the lifter in a soft-jawed vice or hold it securely in a rag.
2. Use a small pick or paperclip to gently depress the internal check ball through the oil feed hole.
3. While holding the check ball open, slowly compress the plunger using your fingers.
4. You may see oil come out — this is normal.
5. Repeat until the plunger can be easily compressed and springs back under light pressure.
Make: Nissan
Engine: SR20DE / SR20DET
-
Silvia / 180SX Series (RWD):
- S13 Silvia – SR20DE / SR20DET
- RPS13 180SX – SR20DE / SR20DET
- S14 Silvia / 200SX – SR20DE / SR20DET
- S15 Silvia / 200SX – SR20DE / SR20DET
-
Front-Wheel Drive SR20:
- N15 Pulsar SSS (Australia) – SR20DE
- P10 Primera (Japan, Europe) – SR20DE
- P11 Primera (Japan, Europe) – SR20DE
- U13 Bluebird (Japan, NZ) – SR20DET (Bluebird SSS ATTESA)
- B13 Sentra SE-R (US) – SR20DE
- B14 200SX SE-R (US) – SR20DE
- Nissan NX2000 (US) – SR20DE
- Nissan Avenir (some trims) – SR20DET
- Nissan Presea R11 – SR20DE (some trims)
Not Compatible With:
- RNN14 Pulsar GTI-R – SR20DET solid lifter head
- Sunny GTI-R (Europe) – SR20DET solid lifter head
Authorised Distributors:

FAQ:
Q: Are they Denstoj compatible with Kelford cams and spring kits?
A: Yes.
Q: Do I need to set valve lash?
A: No. As they're hydraulic lifters, you're not setting valve lash per say as that gap is taken up by the lifter once oil pressure is fed into the head. Instead, when running dual guide shims, what we recommend doing is is making sure the heights of the guides are within +/- 0.025mm of each other.
Questions? Email rockers@denstoj.com.au
IN STOCK – Ships Immediately
Share




